diff options
Diffstat (limited to 'home/.config/zsh/.zshrc')
| -rw-r--r-- | home/.config/zsh/.zshrc | 322 |
1 files changed, 0 insertions, 322 deletions
diff --git a/home/.config/zsh/.zshrc b/home/.config/zsh/.zshrc deleted file mode 100644 index fad4bca..0000000 --- a/home/.config/zsh/.zshrc +++ /dev/null @@ -1,322 +0,0 @@ -# Interactive zsh configuration. - -# ── Terminal ────────────────────────────────────────────────────────────────── -stty -ixon # disable XON/XOFF flow control (frees Ctrl-S/Ctrl-Q) -ttyctl -f # freeze terminal state; programs can't leave it broken - -# ── Options ─────────────────────────────────────────────────────────────────── -# Note: appendhistory, nomatch, notify are zsh defaults — not set here. -setopt autocd # cd by typing directory name -setopt extendedglob # extended glob patterns (#, ~, ^) -setopt interactivecomments # allow # comments in interactive shell -setopt rmstarsilent # don't confirm rm * -setopt prompt_subst # expand variables/functions in prompt -setopt auto_pushd # cd pushes old dir onto stack (cd -<TAB> to browse) -setopt pushd_ignore_dups # don't push duplicate dirs onto stack -unsetopt beep # no terminal bell - -# ── History ─────────────────────────────────────────────────────────────────── -HISTFILE="$XDG_STATE_HOME/zsh/history" -HISTSIZE=50000 -SAVEHIST=50000 -setopt extended_history # save timestamp and duration per entry -setopt share_history # share history across concurrent sessions -setopt hist_ignore_all_dups # remove older duplicate when adding new entry -setopt hist_find_no_dups # skip duplicates when searching history -setopt hist_reduce_blanks # trim superfluous whitespace from entries -setopt hist_ignore_space # commands starting with space are not saved - -# ── Emacs keybindings ───────────────────────────────────────────────────────── -bindkey -e - -# ── Prompt ──────────────────────────────────────────────────────────────────── -autoload -Uz colors && colors -source /usr/share/git/completion/git-prompt.sh -PROMPT='%B%{$fg[green]%}%n%{$reset_color%}@%{$fg[cyan]%}%m%{$reset_color%}:%b%{$fg[yellow]%}%~%{$reset_color%}$(__git_ps1 " (%s)")%(?..[%{$fg[red]%}%?%{$reset_color%}]) %(!.#.>) ' - -# ── Completion ──────────────────────────────────────────────────────────────── -fpath=($XDG_DATA_HOME/zsh/completion $fpath) -autoload -Uz compinit && compinit -d "$XDG_CACHE_HOME/zsh/zcompdump" - -zstyle ':completion:*' menu select # arrow-key driven menu for ambiguous completions -zstyle ':completion:*' completer _expand_alias _complete _ignored _match _approximate -# │ │ │ │ └ fuzzy match (typo tolerance) -# │ │ │ └ try pattern matching -# │ │ └ include normally hidden completions -# │ └ standard completion -# └ expand aliases before completing -zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS} # colorize file completions like ls -zstyle ':completion:*' use-cache on # cache completions (speeds up pip, dpkg, etc.) -zstyle ':completion:*' cache-path "$XDG_CACHE_HOME/zsh" -zstyle ':completion:*:match:*' original only # only show original when pattern-matching -zstyle ':completion:*:functions' ignored-patterns '_*' # hide internal completion functions -zstyle ':completion:*:*:kill:*' menu yes select # interactive menu for kill completion -zstyle ':completion:*:kill:*' force-list always # always show process list for kill -zstyle ':completion:*:cd:*' ignore-parents parent pwd # cd never completes . or .. -zstyle ':completion::complete:*' gain-privileges 1 # use doas/sudo for privileged completions -zstyle -e ':completion:*:approximate:*' \ - max-errors 'reply=($((($#PREFIX+$#SUFFIX)/3))numeric)' # allow 1 typo per 3 chars typed - -_comp_options+=(globdots) # include hidden files in completion - -# ── Terminal key setup ───────────────────────────────────────────────────────── -# Application mode ensures terminfo values are valid during line editing. -# Without this, some terminals send wrong sequences for special keys. -if (( ${+terminfo[smkx]} && ${+terminfo[rmkx]} )); then - autoload -Uz add-zle-hook-widget - function zle_application_mode_start { echoti smkx } - function zle_application_mode_stop { echoti rmkx } - add-zle-hook-widget -Uz zle-line-init zle_application_mode_start - add-zle-hook-widget -Uz zle-line-finish zle_application_mode_stop -fi - -# Up/Down stored for history-substring-search bindings (set after plugin source) -typeset -g -A key -key[Up]="${terminfo[kcuu1]}" -key[Down]="${terminfo[kcud1]}" - -# ── Custom keybindings ──────────────────────────────────────────────────────── -bindkey \^U backward-kill-line - -# Word navigation (Ctrl-Right also accepts autosuggestion word-by-word — fish-like) -bindkey '^[[1;5C' forward-word # Ctrl-Right -bindkey '^[[1;5D' backward-word # Ctrl-Left -bindkey '^[[1;3C' forward-word # Alt-Right -bindkey '^[[1;3D' backward-word # Alt-Left -bindkey '^H' backward-kill-word # Ctrl-Backspace -bindkey '^[[3;5~' kill-word # Ctrl-Delete - -# Ctrl-Z: toggle foreground/background (no need to type 'fg') -toggle-fg-bg() { - if (( ${#jobstates} )); then - zle .push-input - BUFFER="fg" - zle .accept-line - else - zle .push-input - zle .clear-screen - fi -} -zle -N toggle-fg-bg -bindkey '^Z' toggle-fg-bg - -# Ctrl-D exits even on non-empty line -exit_zsh() { exit } -zle -N exit_zsh -bindkey '^D' exit_zsh - -# Ctrl-X Ctrl-E: edit command in $EDITOR -autoload -Uz edit-command-line -zle -N edit-command-line -bindkey "^X^E" edit-command-line - -# Ctrl-Y: copy current command line to clipboard (OSC 52 — terminal-native) -copy-line-to-clipboard() { printf '\033]52;c;%s\a' "$(echo -n "$BUFFER" | base64)" } -zle -N copy-line-to-clipboard -bindkey '^Y' copy-line-to-clipboard - -# ── Word style ──────────────────────────────────────────────────────────────── -# Ctrl-W/Alt-B/Alt-F use shell quoting rules for word boundaries -autoload -Uz select-word-style -select-word-style shell - -# ── Smart dot expansion ─────────────────────────────────────────────────────── -# Typing .. automatically expands: ... → ../.. , .... → ../../.. , etc. -rationalise-dot() { - if [[ $LBUFFER = *.. ]]; then - LBUFFER+=/.. - else - LBUFFER+=. - fi -} -zle -N rationalise-dot -bindkey . rationalise-dot - -# ── Window title ────────────────────────────────────────────────────────────── -autoload -Uz add-zsh-hook - -xterm_title_precmd() { print -Pn -- '\e]2;%~\a' } -xterm_title_preexec() { print -Pn -- '\e]2;%~ %# ' && print -n -- "${(q)1}\a" } - -if [[ "$TERM" == (xterm-ghostty|st*|screen*|xterm*|rxvt*|tmux*|putty*|konsole*|gnome*) ]]; then - add-zsh-hook -Uz precmd xterm_title_precmd - add-zsh-hook -Uz preexec xterm_title_preexec -fi - -# ── Zellij tab naming (dir:cmd like tmux) ──────────────────────────────────── -if [[ -n "$ZELLIJ" ]]; then - _zellij_dir() { [[ "$PWD" == "$HOME" ]] && echo '~' || echo "${PWD##*/}"; } - _zellij_tab_idx() { echo $(( $(zellij action current-tab-info 2>/dev/null | grep -oP 'position: \K\d+') + 1 )); } - _zellij_tab_precmd() { zellij action rename-tab "$(_zellij_tab_idx):$(_zellij_dir)" 2>/dev/null; } - _zellij_tab_preexec() { zellij action rename-tab "$(_zellij_tab_idx):$(_zellij_dir):${1%% *}" 2>/dev/null; } - add-zsh-hook precmd _zellij_tab_precmd - add-zsh-hook preexec _zellij_tab_preexec -fi - -# ── Recent directories ──────────────────────────────────────────────────────── -autoload -Uz chpwd_recent_dirs cdr -add-zsh-hook chpwd chpwd_recent_dirs -[[ -d ${XDG_STATE_HOME}/zsh ]] || mkdir -p "${XDG_STATE_HOME}/zsh" -zstyle ':chpwd:*' recent-dirs-file "$XDG_STATE_HOME/zsh/chpwd-recent-dirs" -zstyle ':completion:*:*:cdr:*:*' menu selection - -# ── OSC 7 — report CWD to terminal (zellij uses this for new pane/tab CWD) ── -_osc7_chpwd() { - printf '\e]7;file://%s%s\e\\' "${HOST}" "${PWD}" -} -add-zsh-hook chpwd _osc7_chpwd -_osc7_chpwd - -# ── Help system ─────────────────────────────────────────────────────────────── -autoload -Uz run-help run-help-git run-help-ip -(( $+aliases[run-help] )) && unalias run-help -alias help=run-help - -# ── Bracketed paste ─────────────────────────────────────────────────────────── -autoload -Uz bracketed-paste-magic -zle -N bracketed-paste bracketed-paste-magic - -# ── Aliases ─────────────────────────────────────────────────────────────────── -# Files -alias l='lsd -l' -alias la='lsd -lA' -alias lt='lsd --tree' -alias mkdir='mkdir -p' -alias du='du -h' -alias df='df -h' -alias free='free -h' - -# Grep / diff with color -alias grep='grep --color=auto' -alias fgrep='grep -F --color=auto' -alias egrep='grep -E --color=auto' -alias diff='diff --color=auto' -alias dmesg='dmesg --color=auto' -alias dm='dmesg --color=always | less -r' - -# Networking -alias ip="ip -color=auto" -alias lsip="ip -human -color=auto --brief address show" -alias ipa="ip -stats -details -human -color=auto address show" -alias ipecho='curl ipecho.net/plain' -alias ss='doas ss -tupnl' - -# Privilege escalation -alias sudo='doas' -alias sudoedit='doasedit' -alias gimme='doas chown $USER:$(id -gn $USER)' -alias pacdiff='doas pacdiff' - -# Pacman -alias pacopt='comm -13 <(pacman -Qqdt | sort) <(pacman -Qqdtt | sort)' - -# Git -alias g='git' - -# Systemd -alias sys='systemctl' -alias ssys='doas systemctl' -alias sysu='systemctl --user' - -# Navigation -alias c='clear' - -# Yazi: cd-on-exit wrapper -y() { - local tmp="$(mktemp -t "yazi-cwd.XXXXXX")" - command yazi "$@" --cwd-file="$tmp" - IFS= read -r -d '' cwd < "$tmp" - [[ "$cwd" != "$PWD" ]] && [[ -d "$cwd" ]] && builtin cd -- "$cwd" - rm -f -- "$tmp" -} - -# Tools -alias stow='stow -R --no-folding --adopt' -alias curl='curlie' -alias cpr='rsync --archive -hh --partial --info=stats1,progress2 --modify-window=1' -alias mvr='rsync --archive -hh --partial --info=stats1,progress2 --modify-window=1 --remove-source-files' -alias sub='subliminal download -l en' - -# Neovim -alias n='nvim' -alias ndiff='nvim -d' -alias nd='nvim -d' -alias nview='nvim -R' -alias nv='nvim -R' -alias ng='nvim +Neogit' - -# Zellij: smart attach — 0 sessions: create, 1: attach, many: welcome picker -za() { - if [[ -n $ZELLIJ ]]; then - echo "Already inside zellij" >&2 - return 1 - fi - local -a sessions=("${(@f)$(zellij list-sessions -ns 2>/dev/null)}") - sessions=(${sessions:#}) - case ${#sessions} in - 0) zellij ;; - 1) zellij attach "${sessions[1]}" ;; - *) zellij -l welcome ;; - esac -} - -# Just -alias j='just' - -# LLVM / Clang tooling -alias ncmake='cmake -G Ninja -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_C_COMPILER_LAUNCHER=ccache -DCMAKE_CXX_COMPILER_LAUNCHER=ccache -DCMAKE_C_FLAGS="$DEV_CFLAGS" -DCMAKE_CXX_FLAGS="$DEV_CFLAGS" -DCMAKE_INSTALL_PREFIX=build/install -DCMAKE_BUILD_TYPE=Debug -DBUILD_SHARED_LIBS=ON -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -B build' -alias ircc='clang -S -emit-llvm -fno-discard-value-names -O0 -Xclang -disable-O0-optnone -o -' -alias irfc='flang -S -emit-llvm -O0 -o -' -alias astcc='clang -Xclang -ast-dump -fsyntax-only' -alias astfc='flang -fc1 -fdebug-dump-parse-tree' -alias symfc='flang -fc1 -fdebug-dump-symbols' -alias gdbr='gdb -ex start --args' - -# GitHub Copilot CLI -alias copilot='gh copilot --autopilot --enable-all-github-mcp-tools --yolo --resume' - -# ── Alias completions ───────────────────────────────────────────────────────── -compdef g=git -compdef j=just -compdef n=nvim ndiff=nvim nd=nvim nview=nvim nv=nvim -compdef sys=systemctl ssys=systemctl sysu=systemctl -compdef l=lsd la=lsd lt=lsd - -# ── GPG agent ───────────────────────────────────────────────────────────────── -# Set GPG_TTY to this shell's actual TTY (not the login console) and tell -# the agent so pinentry prompts appear in the right terminal -export GPG_TTY=$TTY -gpg-connect-agent updatestartuptty /bye &>/dev/null - -# ── Zoxide (smart directory jumping) ────────────────────────────────────────── -# z foo → jump to frecency-ranked dir matching "foo" -# zi → interactive picker with fzf -eval "$(zoxide init zsh)" - -# ── FZF ─────────────────────────────────────────────────────────────────────── -source <(fzf --zsh) - -# Ctrl-X Ctrl-R: search history with fzf and immediately execute -fzf-history-widget-accept() { - fzf-history-widget - zle accept-line -} -zle -N fzf-history-widget-accept -bindkey '^X^R' fzf-history-widget-accept - -_fzf_compgen_path() { fd --hidden --follow --exclude ".git" . "$1" } -_fzf_compgen_dir() { fd --type d --hidden --follow --exclude ".git" . "$1" } - -# ── Plugins (must be sourced last) ──────────────────────────────────────────── -# Highlight config must be set BEFORE sourcing the plugin -ZSH_HIGHLIGHT_HIGHLIGHTERS=(main brackets pattern) -typeset -A ZSH_HIGHLIGHT_STYLES -ZSH_HIGHLIGHT_STYLES[comment]='fg=yellow' -source /usr/share/zsh/plugins/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh - -source /usr/share/zsh/plugins/zsh-autosuggestions/zsh-autosuggestions.zsh -bindkey '^[[Z' autosuggest-accept # Shift-Tab to accept suggestion - -source /usr/share/zsh/plugins/zsh-history-substring-search/zsh-history-substring-search.zsh -[[ -n "${key[Up]}" ]] && bindkey -- "${key[Up]}" history-substring-search-up -[[ -n "${key[Down]}" ]] && bindkey -- "${key[Down]}" history-substring-search-down |