diff options
Diffstat (limited to 'home/.config/gamemode.ini')
| -rw-r--r-- | home/.config/gamemode.ini | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/home/.config/gamemode.ini b/home/.config/gamemode.ini new file mode 100644 index 0000000..899cc4c --- /dev/null +++ b/home/.config/gamemode.ini @@ -0,0 +1,97 @@ +[general] +; The reaper thread will check every 5 seconds for exited clients, for config file changes, and for the CPU/iGPU power balance +reaper_freq=5 + +; The desired governor is used when entering GameMode instead of "performance" +desiredgov=performance +; The default governer is used when leaving GameMode instead of restoring the original value +defaultgov=performance + +; The iGPU desired governor is used when the integrated GPU is under heavy load +; igpu_desiredgov=powersave +; Threshold to use to decide when the integrated GPU is under heavy load. +; This is a ratio of iGPU Watts / CPU Watts which is used to determine when the +; integraged GPU is under heavy enough load to justify switching to +; igpu_desiredgov. Set this to -1 to disable all iGPU checking and always +; use desiredgov for games. +; igpu_power_threshold=0.3 + +; GameMode can change the scheduler policy to SCHED_ISO on kernels which support it (currently +; not supported by upstream kernels). Can be set to "auto", "on" or "off". "auto" will enable +; with 4 or more CPU cores. "on" will always enable. Defaults to "off". +softrealtime=off + +; GameMode can renice game processes. You can put any value between 0 and 20 here, the value +; will be negated and applied as a nice value (0 means no change). Defaults to 0. +renice=0 + +; By default, GameMode adjusts the iopriority of clients to BE/0, you can put any value +; between 0 and 7 here (with 0 being highest priority), or one of the special values +; "off" (to disable) or "reset" (to restore Linux default behavior based on CPU priority), +; currently, only the best-effort class is supported thus you cannot set it here +ioprio=0 + +; Sets whether gamemode will inhibit the screensaver when active +; Defaults to 1 +; inhibit_screensaver=1 + +[filter] +; If "whitelist" entry has a value(s) +; gamemode will reject anything not in the whitelist +;whitelist=RiseOfTheTombRaider + +; Gamemode will always reject anything in the blacklist +;blacklist=HalfLife3 +; glxgears + +[gpu] +; Here Be Dragons! +; Warning: Use these settings at your own risk +; Any damage to hardware incurred due to this feature is your responsibility and yours alone +; It is also highly recommended you try these settings out first manually to find the sweet spots + +; Setting this to the keyphrase "accept-responsibility" will allow gamemode to apply GPU optimisations such as overclocks +;apply_gpu_optimisations=0 + +; The DRM device number on the system (usually 0), ie. the number in /sys/class/drm/card0/ +;gpu_device=0 + +; Nvidia specific settings +; Requires the coolbits extension activated in nvidia-xconfig +; This corresponds to the desired GPUPowerMizerMode +; "Adaptive"=0 "Prefer Maximum Performance"=1 and "Auto"=2 +; See NV_CTRL_GPU_POWER_MIZER_MODE and friends in https://github.com/NVIDIA/nvidia-settings/blob/master/src/libXNVCtrl/NVCtrl.h +;nv_powermizer_mode=1 + +; These will modify the core and mem clocks of the highest perf state in the Nvidia PowerMizer +; They are measured as Mhz offsets from the baseline, 0 will reset values to default, -1 or unset will not modify values +;nv_core_clock_mhz_offset=0 +;nv_mem_clock_mhz_offset=0 + +; AMD specific settings +; Requires a relatively up to date AMDGPU kernel module +; See: https://dri.freedesktop.org/docs/drm/gpu/amdgpu.html#gpu-power-thermal-controls-and-monitoring +; It is also highly recommended you use lm-sensors (or other available tools) to verify card temperatures +; This corresponds to power_dpm_force_performance_level, "manual" is not supported for now +;amd_performance_level=high + +[supervisor] +; This section controls the new gamemode functions gamemode_request_start_for and gamemode_request_end_for +; The whilelist and blacklist control which supervisor programs are allowed to make the above requests +;supervisor_whitelist= +;supervisor_blacklist= + +; In case you want to allow a supervisor to take full control of gamemode, this option can be set +; This will only allow gamemode clients to be registered by using the above functions by a supervisor client +;require_supervisor=0 + +[custom] +; Custom scripts (executed using the shell) when gamemode starts and ends +;start=notify-send "GameMode started" +; /home/me/bin/stop_ethmining.sh + +;end=notify-send "GameMode ended" +; /home/me/bin/start_ethmining.sh + +; Timeout for scripts (seconds). Scripts will be killed if they do not complete within this time. +;script_timeout=10 |